Categories

Product filters Product filters

Flagpoles

$36.46
Stationary Ground Spike, Annin Flagmakers, in stock, Annin Flagmakers
24 in. x 5/8 in. Ground spike for use with fiberglass pole, available in a stationary ground spike or rotating ground spike with ball bearings.
In stock
 

$3.76
350137 - 3-1/2 in. Long by 1-1/4 in. Diameter, Eder Flag, in stock, Eder Flag
Protect your snap hooks and stop the noise with these gray vinyl snap hook covers.
In stock
 

$90.64 $63.98
050538 - 7 in. x 8-1/4 in. Eagle, in stock, Eder Flag
These flying eagle flagpole ornaments have a painted gold powder-coated finish. Available in 3 sizes: 7 in. tall, wing span of 8-1/4 in. 7-1/4 in....
In stock
 

$156.14
330078 - 4-1/4in. Width 8-1/2in. & Height , Eder Flag, in stock, Eder Flag
Our plain cross flagpole ornament is made of gold-painted aluminum. Available in 2 heights: 8-1/2 in. and 13 in.
In stock
 

$383.00 $345.00
330047 - 4 in. Pole Diameter - 1/2in. Spindle Threading, Eder Flag, in stock, Eder Flag
Add a new look to your flagpole with our gold leaf copper ball flagpole ornament. The diameter of an ornamental ball should match the butt diameter of the...
In stock
 

$25.57
Eder Flag, in stock, Eder Flag
3 in. Gold anodized aluminum globe for our Gold Aluminum 15 in. Flying Eagle with 15 in. wing span, items # 330056, 330059.

$33.95
Eder Flag, in stock, Eder Flag
This gold cast aluminum bracket for a 1 in. pole diameter, displays a flagpole vertical, at a 45 degree, 50 degree, 65 degree, or horizontal angle, comes...
In stock

$258.44
Eder Flag, in stock, Eder Flag
Our painted gold aluminum botonee cross is measures 12 in. high and 12 in. wide. Only available for a spindle with 5/8 in. threading.

$1,185.12 $1,123.94
7 ft. Sleeve 15 in., Diameter 24 in. Base Plate & 24 in. Ground Spike, Eder Flag, in stock, Eder Flag
The most common method of flagpole installation is in-ground using a galvanized steel foundation sleeve with base plate, support plate, ground spike, and...
In stock
 

$134.60
2 ft. Sleeve 6 in. Diameter 6 in. Base Plate and 8 in. Ground Spike , Eder Flag, in stock, Eder Flag
The most common type of flagpole installation is the in-ground galvanized steel foundation sleeve with base plate and ground spike method, which calls for...
In stock
 

$39.04
Eder Flag, 16 in.(A), 5/8 in. (B), 3-1/2 in. (C), 4 in. (D), in stock, Eder Flag
Galvanized steel anchor bolt for shoe base flagpole installations. ( 1 Bolt ) Each bolt comes complete with 2 hex nuts, 1 washer and 1 lock washer.
In stock
 

$2.70
Eder Flag, in stock, Eder Flag
These spring-loaded metal clips allow for secure mounting of a flag to a 1 inch outside diameter pole.
In stock

$39.66 $37.39
Eder Flag, in stock, Eder Flag, Model FC-20 - 2in. Pole Diameter, Silver Finish
These flagpole ornament caps are made of cast aluminum designed to slip over the top of the flagpole and be secured with three 1/4 in. stainless steel set...
In stock
 

$646.08
Eder Flag, in stock, Eder Flag
This light measures 8-3/4 in. by 4-1/2 in. and is ideal for taller flagpoles near airports or flight paths. A lamp bulb is included. Set-up of the flagpole...

$213.21 $195.17
15 x 25 ft. Flag Size - 2 Snaps, 3 Quick Links, Spring, Safety Cable, Eder Flag, in stock, Eder Flag
Deluxe flag arrangements, supplied with flag snaps, shock spring and safety. Constructed of 1/8 in. stainless steel aircraft cable with a stainless steel...
In stock
 

$33.99 $23.95
Annin Flagmakers, in stock, Annin Flagmakers
1-3/8 in. Top fixed cap, replacement part for the 19 ft. Multi-use telescoping flagpole, part # 648.

$3,976.10
25NSDM-YAG - 25 ft. Flagpole , PLP, in stock, PLP
These fiberglass flagpoles with a Single Mast - Yardarm and Gaff very from 25 feet to 60 feet in height. Our Severe Weather Series are rated for a 150 mph...
In stock
 

$3,712.27
25NSDM-YA - 25 ft. Flagpole , PLP, in stock, PLP
Our fiberglass flagpoles with a Single Mast with Yardarm very from 25 feet to 60 feet in height. Our Severe Weather Series are rated for a 150 mph wind...
In stock
 

$166.90
Eder Flag, in stock, Eder Flag
For External Halyard Poles, Threaded Type, Stationary, Double Pulley Molded fiberglass construction with 1-1/2 in. outside diameter nylon pulleys on 1/4 in....

$166.90 $85.45
Eder Flag, in stock, Eder Flag
These stationary slip fit Type flagpole trucks with a single pulley are made of molded fiberglass construction with 3/4 in. outside diameter nylon pulley on...

$1,034.43 $743.25
Model FGR15 - 15 ft. Flagpole, Eder Flag, in stock, Eder Flag
The fiberglass flagpoles are manufactured to duplicate the classic Greek Entasis taper design. All poles have an ultra-hard, gel coat finish that stands up...
In stock
 

$20.39 $10.42
Eder Flag, in stock, Eder Flag, 310101 - 3/4 in. Flagpole Diameter 8-1/2 in. Length
These aluminum and galvanized steel lawn sockets are for flagpoles with a 3/4 in. to 1-3/8 in. pole diameter and lengths are 8-1/2 inches to 10 inches. Each...
In stock
 

$18.04
Eder Flag, 310068 - Silver Finish, in stock, Eder Flag
These cast aluminum brackets come in silver or white, for a 1 inch flagpole diameter. Comes are supplied with thumb screw and can be mounted with screws or...
In stock
 

$123.84
Eder Flag, in stock, Eder Flag
This is a Double top only 24 in. deluxe banner arm mounting set, contains cast aluminum mounting brackets with stainless mounting straps. Crossbars are...

$121.14
Eder Flag, in stock, Eder Flag
This is a Double top only 18 in. deluxe banner arm mounting set, contains cast aluminum mounting brackets with stainless mounting straps. Crossbars are...

$138.64
Eder Flag, in stock, Eder Flag
This is a Double top only 30 in. deluxe banner arm mounting set, contains cast aluminum mounting brackets with stainless mounting straps. Crossbars are...

$139.99
Eder Flag, in stock, Eder Flag
This 16 in. long aluminum sleeve, base plate is 8 in. x 8 in. for a dock flagpole mount is for 15 ft. & 20 ft. flagpoles, this base is for a pole with a...

$30.28
Eder Flag, in stock, Eder Flag
Deluxe pulley and eye-bolt assembly Includes:  Hex Nut, Washer and Lock Washer. 4-1/8 in. Overall Length,  2-3/8 in. Thread Length,...

$4,944.00 $4,480.50
30 ft. Pole - Model # ECV30 - 6 in. Butt Dia. - 1-Piece Flagpole, Eder Flag, in stock, Eder Flag
All anodized poles are taking 4 to 8 weeks to go through the anodized process before shipping. The Vanguard series internal halyard ground set cone...
In stock
 

$1,277.20 $1,153.60
Model EVWM8 - 8 ft. 1-Piece Flagpole, Eder Flag, in stock, Eder Flag
Vertical Wall Mount 2-3/8 in. Butt Diameter, External Halyard Cone Tapered Aluminum flagpoles with a #313 Dark Bronze Anodized Finish.. Complete Sets...
In stock
 

$7,199.70 $6,447.80
35 ft. - Model ECSAP35-YG - 1-Piece Flagpole, Eder Flag, in stock, Eder Flag
All anodized poles are taking 4 to 8 weeks to go through the anodized process before shipping. #313 Anodized Dark bronze Finish Single Mast Nautical...
In stock
 

$5,953.40 $5,376.60
Eder Flag, 30 ft. - Model ECAP30-Y - 1-Piece Flagpole, in stock, Eder Flag
All anodized poles are taking 4 to 8 weeks to go through the anodized process before shipping. #313 Dark Bronze Anodized Finish External Halyard Ground...
In stock
 

Reviews

No data found

Write a review